The zero-gas consumption blast heat control system uses S7200PLC + 7-inch color touch screen display automatic control, adopts the international standard MODBUS communication protocol, all sensors are connected to the bus, which is more reliable and simpler than distributed connection; Chinese interface; vivid color screen, can be connected to the PC through the RS485 interface for parameter setting and data acquisition and monitoring.
Technical indicators
(1) Temperature measurement: 00 ~ + 300 ℃, ± 1 ℃ accuracy
(2) Power input: AC voltage 220v ± 10%.
(3) Power consumption: 10W.
(4) Switch input: 14 points, dry contact input.
(5) Switch output: 26 points relay contact, 220V/2A, normally open contact.
(6) Analog: 10 inputs (4-20ma=6400-32000)
(7) Working environment: temperature 0 ~ 50 ℃, humidity not more than 85%, vibration not more than 0.5g.
There is no obvious dust, acid, corrosive gas, or substance in the surrounding air.
(8) Communication: RS485 interface, half-duplex mode, MODBUS-RTU communication protocol, effective distance ≤ 1200m.
You may like:
Do I Need A Filter For My Air Compressor
Do I Need A Filter On My Air Compressor
How Far Should Filter Be From Air Compressor
How To Change Air Filter On Lg Linear Compressor Refrigerator
How To Clean Air Compressor Filter
How To Clean Compressor Air Filter
How To Install Air Compressor Filter
How To Install Air Filter On Air Compressor
How To Install Water Filter On Air Compressor
Where To Install Air Compressor Filter
Inquiry
Product Description
|
Working conditions and technical indicators |
|
|
Purge Air |
≤0% |
|
Inlet pressure |
0.6~1.0Mpa |
|
Inlet oil content |
≤0.1mg/m³ |
|
Dew point |
-20℃~-40℃ |
|
Standard working period |
8 hours |
|
Inlet temperature |
0℃~45℃ |
|
Power |
380V/50HZ |
Construction Cases
Contact Us for More Details
Don't hesitate to contact when you need us!







Why Compressed Air Drying Determines System Reliability Moisture carried inside a compressed air line is one of the most common causes of unplanned downtime in...
View MoreThe Overlooked Variable Behind Equipment Failures In most medical and pharmaceutical facilities, compressed air is treated as a utility rather than a process ...
View MoreWhy Pressure Dew Point Is the Hidden Variable in Air Quality Control Most compressed air quality conversations start with particle filtration and oil carryove...
View MoreThe Hidden Cost of Corrosion in Compressed Air Systems Every compressed air network eventually reveals the weakest link in its filtration chain, and in most ca...
View More